EBOL SP-N
a mixture of mineral oils and animal fats with addition of an anti-corrosion agentProduct characteristics
EBOL SP-N is a mixture of mineral oils and animal fats with addition of an anti-corrosion agent. It is used as a special separating agent for various construction technologies.
Applications
EBOL SP-N is a separating agent. Due to its properties, it finds good use in manufacturing concrete elements from warm concrete mixtures in both vertical and horizontal form liners. EBOL SP-N can be also used in other types of concrete mixture processes. A layer of EBOL SP-N separates efficiently on a whole treated surface including components of complex shapes. At the same time, anti-corrosion component of EBOL SP-N constrains effects of corrosion on such separated surfaces.
Product Features
EBOL SP-N is flavescent to light brown coloured water-insoluble liquid with a characteristic smell.
Organic solvent content
|
characteristic |
unit |
value |
|
product's density |
g.cm-3 |
0.860 |
|
Content of organic solvents (expressed in mass fraction) |
kg/kg of the product |
0.055 |
|
Total organic carbon content |
kg/kg of the product |
0.046 |
|
Content of nonvolatile substances (expressed in volume percent) |
volume percent |
93.20 |
EBOL SP-N must comply with the following quality characteristics:
|
Quality characteristic |
Value |
Methodology of assessment |
|
Density at 20 °C (kg.m-3) |
800 to 950 |
ČSN 65 0342 |
|
Viscosity at 20 °C (mPa.s) |
maximally 42 |
PN-ZM 133/2001 |
Directions for Use
EBOL SP-N can be applied by common types of applying mechanisms used in panel factories without any need to specially modify such equipment.
Application examples
EBOL SP-N is applied in a form of aerosol to a metallic form liner in a vertical battery with consumption ranging between 0.1 to 0.15 kg/m2. Already at this consumption, a film of EBOL SP-N is not removed during consecutive filling of the form with a concrete mixture.
Packaging & Storage
EBOL SP-N is delivered in iron tanks or 200 l iron barrels. Alternatively, it can be delivered in different containers that were discussed and agreed on in advance. Store it in a sealed container in places protected from direct climatic influences. Recommended storage temperature is between +5 to +25 °C. Must not be stored in the sun or near heat sources. Storing at temperatures below 0 °C does not affect product's application properties. In such cases, it is strongly recommended to temper the agent at 25 °C followed by homogenization before its use.
Transport
EBOL SP-N is transported by covered vehicles. It is not subject to ADR/RID Regulations.
Warranty
Provided the product is transported and stored in accordance with the above written conditions, its warranty is 6 months from the date it was delivered from a warehouse.
Note
Data about the product characteristics and its processing were obtained by laboratory measurements and application tests. This technical data sheet can provide solely legal advice without any engagements. Use of the product should be always adjusted to specific conditions.
| Purpose of use | odformovací prostředky |
|---|
