Bent OP

Product characteristics:

Water-spirit solution of ion and non-ion surface active mixtures and auxiliary substances.

Properties of the product

Low viscosity liquid of light pastel colour with fine fresh scent.

Application

In concentrated state it is used for washing strongly contaminated oil grease machines, motors, objects, etc. It is used for washing all types of floorboards, window frames, removal of flies from car windscreens, etc., in diluted state during application of 1 to 2 tablespoons per 5 litres of water. It lightly removes old or greasy dirt. BENT OP is suitable for machine washing of floorboards!

Examples of further use:

Cleaning of motors:

BENT OP is diluted with water in ratio 1:1 and it is applied by sprinkler on contaminated motor and motor area, leave it for 15 minutes for sufficient effects. Rinse with pressure washer, ideally with tepid water Cold water is sufficient. The agent is suitable not only for the motor surface but also for the area of the brake roller, which is the location of brake liquid stains.  The stains are removed without any problems.

Cleaning strongly contaminated floors

BENT OP is applied on contaminated locations on the floor and left to work for about 10 minutes. To disturb the stain surface and processing the agent in the stains it is suitable to use rough brush or broom. Rinse with pressure washer, ideally with tepid water Cold water is sufficient.

Organic solvent content

Packaging, storage

ENT OP is supplied in PE cans of 25 litre volumes or in other pre-agreed containers.  It is stored in closed containers in the locations protected from direct weather conditions. Recommended storage temperature is +5 to +25 °C. Short time exposure to higher temperatures, e.g. during transport, does not affect the product application features.

Transport

BENT OP is transported with covered transport vehicles. Not a subject to regulations ADR/RID.

Guarantee period

If the product is transported and stored according to the above-mentioned conditions, the warranty is 12 months from the date of warehouse delivery.  

Note

The data on the product properties and its processing were received by laboratory measuring and application tests. This commercial sheet can be used for reference purposes, the product processing must be adapted to the specific conditions.